CONCAR CH13
Built: 1987 · Series: Other models
More machines from model year 1987
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Concar – other models: the collective page of trailers outside the named ranges with types CA 20, CB 20, CB 25, CE 30 and CH 13, 400 to 800 kg unladen weight, up to 3,000 kg gross weight
This page gathers the Concar trailers outside the named ranges. The type designations CA 20, CB 20, CB 25, CE 30 and CH 13 – also with an L suffix for the long version and in spelling variants with a dot or space such as CB25., C A 20 L. and C20L – carry the permissible gross weight in hundreds of kilograms as their number: CH 13 for 1,300 kg, CA 20 and CB 20 for 2,000 kg, CB 25 for 2,500 kg and CE 30 for 3,000 kg.
Read on 3 more paragraphs
The register lists 15 versions here with unladen weights from 400 to 800 kg, permissible gross weights from 1,300 to 3,000 kg and widths from 1,760 to 2,290 mm.
The ratio of an unladen weight up to 800 kg to a gross weight up to 3,000 kg shows a wide payload range – from the light car-trailer class to versions already reaching the class of smaller tandem trailers with a high payload, for building materials, machinery or vehicle transport.
For a used Concar trailer, the checklist covers the chassis and load platform for corrosion and deformation, the condition of the overrun actuator and braking system especially on the heavier CE and CB types, the axle bearings and tyres, and the function of the lighting system; on the CE 30 types with the highest payload, it is also worth matching the tyre load rating against the actual gross weight. Spare parts for axles and the overrun actuator are usually generic AL-KO or Knott components for this design.
Sources: SpecCodex register, model data: Concar (weitere Modelle)
Technical data
Dimensions and weights
| Width | 1,760 mmcorrect |
|---|---|
| Unladen weight | 400 kgcorrect |
| Gross vehicle weight | 1,300 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the CONCAR CH13 weigh?
The unladen weight is 400 kg.
What is the gross vehicle weight of the CONCAR CH13?
1,300 kg.
Up to what speed is the CONCAR CH13 approved?
Approved up to 100 km/h.
When was the CONCAR CH13 built?
Production years: 1987.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
