Campa CP 2000 DR – specifications
Built: 1978–1998 · Series: Other models
Data for the version built 1978–1998 · Data origin: Official register · sources
More machines from model year 1978
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Campa - other models: CP range outside the named series, 64 versions, kerb weight 455 to 9,740 kg, gross weights up to 18.5 t
Campa appears in the register with a broad range of trailers, from light versions to medium-weight twin-axle models. This collective page lists all Campa versions that could not be assigned to a separately named series; the type designations of the CP range combine a four-digit number with letter suffixes for different trim variants.
Read on 3 more paragraphs
The register lists 64 versions with kerb weights from 455 to 9,740 kg, gross weights from 1,000 to 18,500 kg and widths from 1,500 to 2,580 mm; lengths range from 6,770 to 13,280 mm.
The span from light trailers to models with an 18.5-tonne gross weight covers both private and commercial needs, from general cargo to livestock trailers; in the European trailer market, Campa competes with numerous smaller and mid-sized makers of similar weight classes that rarely offer an extensive service network outside their home country.
When buying used, on the lighter models check the coupling head, tyres and frame corrosion; on the heavier versions also check the state of axles and brakes, the tightness of any hydraulics, and corrosion at load-bearing welds. Spares for older models can often now only be sourced directly from the manufacturer, so it is worth asking the seller or the manufacturer directly about spare-parts availability before agreeing on a price.
Sources: SpecCodex register, model data: Campa Anhänger (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,480 mmcorrect |
|---|---|
| Coupling-to-axle distance | 5,460 mmcorrect |
| Unladen weight | 1,783 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Campa CP 2000 DR weigh?
The unladen weight is 1,783 kg.
What is the gross vehicle weight of the Campa CP 2000 DR?
2,000 kg.
Up to what speed is the Campa CP 2000 DR approved?
Approved up to 100 km/h.
When was the Campa CP 2000 DR built?
Production years: 1978–1998.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
