Bremat ZCM1 – specifications
Built: 1998–2017 · Series: Other models
Data for the version built 1998–2017 · Data origin: Official register · sources
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bremat – other models: Belgian agricultural and municipal tipping trailers of the MS, F and LT ranges, 800 to 16,190 kg kerb weight, up to 48 t gross vehicle weight
This page gathers Bremat trailers outside the named ranges. Bremat, a Belgian maker of agricultural and municipal tipping trailers, marks its ranges with abbreviations such as MS, F, FT, LT and S, followed by a one- or two-digit number. The numbers rise with the size of each series, as can be seen in the model list from MS 15 to MS 50.
Read on 3 more paragraphs
The register lists here 36 versions with kerb weights from 800 to 16,190 kg and gross vehicle weights from 1,000 to 48,000 kg, at widths from 1,360 to 2,550 mm; length is only recorded for part of the models and ranges from 4,180 to 12,500 mm.
The range spans a light single-axle tipper for farm and field through to a multi-axle skip trailer for hauling soil and bulk material in agricultural and municipal use. Tipping trailers of this type handle the transport of harvest, feed and manure on farms, as well as excavated soil and grit for municipal depots, often paired with a front loader or tractor.
When buying used, check the tipping ram and hydraulics, corrosion at the skip and frame, the function of the side boards and locks, the brake system and axles, and the condition of the reversing and warning lights. On the larger multi-axle versions also check the condition of the twin tyres and towing coupling, plus a valid inspection sticker; spares for hydraulics and axles mostly come through standard suppliers.
Sources: SpecCodex register, model data: Bremat
Technical data
Dimensions and weights
| Length | 4,180 mmcorrect |
|---|---|
| Width | 1,860 mmcorrect |
| Unladen weight | 1,810 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Bremat ZCM1 weigh?
The unladen weight is 1,810 kg.
What is the gross vehicle weight of the Bremat ZCM1?
2,000 kg.
Up to what speed is the Bremat ZCM1 approved?
Approved up to 100 km/h.
What are the dimensions of the Bremat ZCM1?
4,180 mm × 1,860 mm.
When was the Bremat ZCM1 built?
Production years: 1998–2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
