Berco SKÅP – specifications
Built: 2019 · Series: Other models
Data for the version built 2019 · Data origin: Official register · sources
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Berco – further models: the collective page for trailers outside the named series, Berco Skåp and Skåp, 2,262 kg unladen weight, 3,500 kg gross weight
This page collects the Berco trailers that the register does not assign to any named series. Two types are listed: BERCO SKÅP and SKÅP. Both stand in the register as separate entries, and the designations themselves give no indication of a series logic.
Read on 4 more paragraphs
The register lists 2 versions here with an unladen weight of 2,262 kg each, a gross weight of 3,500 kg each, a length of 6,250 mm and a width of 2,300 mm.
With a gross weight of 3,500 kg, this trailer sits at the upper limit of EU trailer category O2, which begins at 750 kg and requires an overrun brake throughout. Towing only needs licence category B as long as the combination's gross weight stays below 3,500 kg, otherwise category BE becomes necessary; on an enclosed box body of this size, the centre of gravity also sits higher than on an open deck, calling for more care through bends.
With a gross weight of 3.5 tonnes, these trailers fall into the class that can still be towed on a category B or BE licence; at an unladen weight of over 2.2 tonnes and a width of 2.3 metres, they are compact but solidly built enclosed bodies.
When buying used, check the condition of the axle and wheel bearings, the operation of the overrun brake and brake linkage, rust on the chassis and drawbar, and the condition of lighting and the electrical connector as well as tyres and wheels; on enclosed bodies also check the roof and door seals. Spare parts for such small makes usually come through independent trailer workshops rather than a manufacturer network.
Sources: SpecCodex register, model data: Berco (weitere Modelle)
Technical data
Dimensions and weights
| Length | 6,250 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Coupling-to-axle distance | 3,450 mmcorrect |
| Unladen weight | 2,262 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Berco SKÅP weigh?
The unladen weight is 2,262 kg.
What is the gross vehicle weight of the Berco SKÅP?
3,500 kg.
Up to what speed is the Berco SKÅP approved?
Approved up to 100 km/h.
What are the dimensions of the Berco SKÅP?
6,250 mm × 2,300 mm.
When was the Berco SKÅP built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
