Beck ZAA 1,4 331817 – specifications
Built: 2006 · Series: Other models
Data for the version built 2006 · Data origin: Official register · sources
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Beck – other models: the collective page for trailers outside the named ranges, the MSHP, MSHAT and WLT type codes, 680 to 2,820 kg unladen weight, up to 6,750 kg gross weight
This page gathers the Beck trailers the register could not assign to a named range. The models are listed under alphanumeric type codes such as MSHP, MSHAT1023, WLT and ZAA 1,4 331817, plus the number 862327, covering different payload classes within the range; the codes are factory type designations rather than descriptive model names.
Read on 4 more paragraphs
The register lists here 6 versions with unladen weights from 680 to 2,820 kg, gross weights from 1,400 to 6,750 kg, lengths from 7,300 to 10,520 mm and widths from 1,760 to 2,550 mm.
The boundary between the two classes sits at a gross weight of 3,500 kg: up to that point a plain overrun brake is permitted, above it only with separate type approval. Towing the lighter versions only needs licence category B, while the versions above 3.5 tonnes require a correspondingly upgraded tow vehicle with licence category C1E or BE.
With gross weights up to 6.75 tonnes, the span runs from the classic O2 class into the range of light O3 trailers for transporting materials, machinery and long goods in commercial use, a segment served by many small and mid-sized European trailer builders.
On a used purchase, the axles and brake system appropriate to the weight class, corrosion on the frame, the load deck, the tyres and lighting, and the match between the type plate and the gross weight all matter. Spare parts run through the general trailer trade.
Sources: SpecCodex register, model data: Beck (weitere Modelle)
Technical data
Dimensions and weights
| Width | 1,760 mmcorrect |
|---|---|
| Coupling-to-axle distance | 760 mmcorrect |
| Unladen weight | 680 kgcorrect |
| Gross vehicle weight | 1,400 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Beck ZAA 1,4 331817 weigh?
The unladen weight is 680 kg.
What is the gross vehicle weight of the Beck ZAA 1,4 331817?
1,400 kg.
Up to what speed is the Beck ZAA 1,4 331817 approved?
Approved up to 100 km/h.
When was the Beck ZAA 1,4 331817 built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
