Bakker Trailerbouw TDM 2000 – specifications
Built: 2003 · Series: Other models
Data for the version built 2003 · Data origin: Official register · sources
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bakker Trailerbouw – other models: the collective page of Dutch tandem and tridem trailers outside the named ranges, unladen weights from 640 to 1,560 kg, gross weights from 2,000 to 3,500 kg
This page gathers the Bakker Trailerbouw trailers the register could not assign to a named range. Bakker Trailerbouw is a Dutch trailer manufacturer; the model names P-Tandem, P-Tridem, Pridem and TDM 2000 name the axle configuration with two or three axles directly in the type designation. The company name Trailerbouw, Dutch for trailer building, describes its core business directly.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 640 to 1,560 kg, gross weights from 2,000 to 3,500 kg and widths from 2,000 to 2,190 mm.
With gross weights up to 3,500 kg, the trailers fall into vehicle class O2; tandem trailers with two axles and tridem trailers with three axles spread the wheel load and, compared with a single-axle trailer, allow a higher payload with more stable road holding, for example for construction and farm machinery or boats. Such multi-axle trailers are often used by rental companies and construction firms that need to haul changing, bulky loads.
Buying used, the overrun brake and its transmission to both or all three axles, even wear on all tyres and brake linings, the equalising mounting of the axles, and rust on the chassis, drawbar and jockey wheel matter on multi-axle trailers. On tridem trailers, uneven tyre wear caused by scrubbing in tight turns also needs attention.
Sources: SpecCodex register, model data: Bakker Trailerbouw (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,190 mmcorrect |
|---|---|
| Coupling-to-axle distance | 700 mmcorrect |
| Unladen weight | 640 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Bakker Trailerbouw TDM 2000 weigh?
The unladen weight is 640 kg.
What is the gross vehicle weight of the Bakker Trailerbouw TDM 2000?
2,000 kg.
Up to what speed is the Bakker Trailerbouw TDM 2000 approved?
Approved up to 100 km/h.
When was the Bakker Trailerbouw TDM 2000 built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
