Auwaerter APPH 2.0 – specifications
Built: 1988 · Series: Other models
Data for the version built 1988 · Data origin: Official register · sources
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Auwärter – other models: the collective page of trailers outside the named ranges, from APP 1.5 to TTH 9.0 and LT 13.5, 270 to 5,530 kg kerb weight, 1.2 to 24 t gross weight
This page gathers the Auwärter trailers the register could not assign to a named range. The APP, APPH, GL, LT, T, TT and TTH type designations each carry a tonnage or payload figure in the name, ranging from the light APP models at 1.5 to 3 through the TT range at 3.5 to the low-loader TTH range at 8.6 to 9.
Read on 3 more paragraphs
The register lists 14 versions here with a kerb weight of 270 to 5,530 kg and a gross weight of 1,200 to 24,000 kg, at widths of 1,830 to 2,550 mm and lengths of 6,110 to 8,350 mm.
The spread from under 2 t to 24 t gross weight shows that this collective page covers both light transport trailers and heavy low-loaders for construction machinery and plant. The TTH range, with the highest tonnage, carries excavators, loaders and similar equipment, while the lighter APP and GL types are built for general cargo and smaller machines.
Buying a used light trailer means checking the load bed, side panels and overrun brake; on the heavy low-loaders, also check the frame and welds for cracks, the condition of the ramps, the braking system and axle units, and, where fitted, the hydraulics of the loading gear. Tyres and wheel bearings belong in the basic check across every weight class. Parts for axles and brakes are available through the commercial-vehicle accessory trade, frame parts usually only through the manufacturer or specialist workshops.
Sources: SpecCodex register, model data: Auwärter (weitere Modelle)
Technical data
Dimensions and weights
| Width | 1,830 mmcorrect |
|---|---|
| Coupling-to-axle distance | 710 mmcorrect |
| Unladen weight | 920 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Auwaerter APPH 2.0 weigh?
The unladen weight is 920 kg.
What is the gross vehicle weight of the Auwaerter APPH 2.0?
2,000 kg.
Up to what speed is the Auwaerter APPH 2.0 approved?
Approved up to 100 km/h.
When was the Auwaerter APPH 2.0 built?
Production years: 1988.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
