Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Alers Bouw › EN13A

Alers Bouw EN13A

Built: 2011–2012 · Series: Other models

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

EN13A comes from the manufacturer Alers Bouw. According to the available register data, the recorded vehicles date from 2011 to 2012. The trailer is 1,560 mm wide. Its kerb weight comes to 360 kg. Fully loaded, it may not exceed 1,300 kg. The wheelbase measures 2,500 mm. Top speed is 100 km/h. The Dutch vehicle register lists 4 examples of this model.

Alers Bouw – other models: the collective page of Dutch building and tipper trailers outside the named ranges, gross weights 1,000 to 3,500 kg

This page gathers the Alers Bouw trailers the register could not assign to a named range; the suffix Bouw is Dutch for construction and points to this Alers division's focus on building-site and tipper trailers. The type designations are abbreviations such as GLS, GSK, KP or TA, often followed by a digit for the weight class; one model carries the suffix Mobiele Compressor, pointing to a trailer for a mobile compressor.

Read on 3 more paragraphs

The register lists here 54 versions with unladen weights from 260 to 2,530 kg and gross weights from 1,000 to 3,500 kg; widths range from 1,400 to 2,600 mm.

Trailers of this weight class up to 3.5 tonnes carry building materials, small equipment and bulk goods on building sites and in horticulture and landscaping in the Netherlands and neighbouring countries; the span from 260 to 2,530 kg unladen weight runs from light single-axle flatbeds to sturdy tandem tippers.

On a used example, rust on the chassis and load bed counts, the condition of axles, suspension, brakes and tyres, the function of the overrun device and lighting, on tipper versions the hydraulics and the condition of the tipping platform, and the tightness of the side panels; spares for Alers Bouw trailers come through the Dutch trailer trade.

Sources: Kennwerte der Modelle Alers Bouw (weitere Modelle), RDW (Niederlande)

Technical data

Dimensions and weights

Width1,560 mmcorrect
Wheelbase2,500 mmcorrect
Unladen weight360 kgcorrect
Gross vehicle weight1,300 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Alers Bouw EN13A weigh?

The unladen weight is 360 kg.

What is the gross vehicle weight of the Alers Bouw EN13A?

1,300 kg.

Up to what speed is the Alers Bouw EN13A approved?

Approved up to 100 km/h.

When was the Alers Bouw EN13A built?

Production years: 2011–2012.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare