Beers SCANIA T3M4X2AS 65115
Built: 1991 · Series: SCANIA
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Beers Scania – the collective page of the Dutch bodybuilder's superstructures on Scania chassis: six- and eight-cylinders, unladen weight 6,580 to 13,310 kg, gross weight 18,000 to 25,300 kg
This page gathers the vehicles of the Dutch bodybuilder Beers on Scania chassis. The model designations follow Scania's own type logic: P, R and T denote the cab series – P the low cab for distribution and construction work, R the high cab for long-haul transport, T the older forward-control range – 4X2 and 6X2 the axle formula, the number of driven axles against the total. Beers fitted these Scania chassis with its own special-purpose superstructures.
Read on 3 more paragraphs
The register lists here 14 versions from six- to eight-cylinders, unladen weights from 6,580 to 13,310 kg, gross weights from 18,000 to 25,300 kg, lengths from 7,150 to 10,640 mm and widths from 2,490 to 2,600 mm.
Bodybuilders such as Beers extend chassis makers' ranges with special-purpose vehicles not built in series at the factory, forming a fixed part of the European commercial-vehicle market for municipal, fire-service and special vehicles on a proven Scania base. Such superstructures are typically built in small series tailored to a specific customer order.
On used examples, rust on the frame and body, the condition of the engine and gearbox of the Scania chassis, the condition of the hydraulics and connections of the particular special body, and the tightness of tanks or crane bearings depending on the version all count; chassis parts run through Scania, body parts through Beers itself.
Sources: SpecCodex register, model data: Beers (Scania-Fahrgestell), Scania (Fahrgestellhersteller)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 4,200 mmcorrect |
| Unladen weight | 6,580 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Beers SCANIA T3M4X2AS 65115 weigh?
The unladen weight is 6,580 kg.
What is the gross vehicle weight of the Beers SCANIA T3M4X2AS 65115?
18,000 kg.
What engine does the Beers SCANIA T3M4X2AS 65115 have?
6 cylinders.
When was the Beers SCANIA T3M4X2AS 65115 built?
Production years: 1991.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SCANIA PA 4X2 AS 70100
SCANIA PM 6X2 AL 70180 V
SCANIA PM 6X2 ZL 70170 V
SCANIA PM 6X2 ZL 70170V
SCANIA RM 6X2 AL 60165S
SCANIA RM 6X2 AL70180 V
SCANIA RM 6X2 AS 70170 V
SCANIA T3M 4X2 AL 75115
SCANIA T3M 4X2 AS 65115
SCANIA T3M 6X2 AL 75178
SCANIA TM 4X2 AL 70110
SCANIA TM 6X2 AL 70180 S
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
