Bcs MARS L 80
Built: 2018 · Series: MARS
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
BCS Mars L 80: the water-cooled compact tractor from the Italian maker near Milan, a four-cylinder diesel of 2,482 cm³, 55 kW, built in 2018
BCS is an Italian maker based in Abbiategrasso near Milan, originally known mainly for single-axle tractors and rotary tillers, which later expanded its range to include four-wheel compact tractors. The Mars L 80 dates from 2018.
Read on 3 more paragraphs
The engine is a water-cooled four-cylinder diesel of 2,482 cm³ producing 55 kW (75 hp) at 2,300 rpm. The tractor is 3,725 mm long and 2,254 mm high, with a wheelbase of 1,450 mm; unladen weight is 2,090 kg, the three-point hydraulics' lift capacity is 2,300 kg, and top speed is 40 km/h. This combination of a water-cooled four-cylinder and around 75 hp is already a strong motorisation for a compact tractor.
A water-cooled four-cylinder of around 75 hp with a lift capacity of 2.3 tonnes on the three-point hydraulics is strongly specified for a compact tractor and suits varied work with heavier implements, going beyond plain mowing or municipal work. The comparatively high lift capacity also allows heavier front and rear implements to be run. At 40 km/h the tractor falls within the T driving-licence category.
When buying used, what matters is the engine's operating hours, the condition of the three-point hydraulics given the lift capacity noted, brakes and tyres at the top speed that is comparatively high for a compact tractor, and the availability of spare parts through the BCS dealer network. It is also worth checking the PTO shaft and its guard and any leaks in the hydraulic system.
Sources: SpecCodex-Register: Kennwerte des Modells Mars L 80, BCS (Wikipedia)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 75 hp (55 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 2,482 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,725 mmcorrect |
|---|---|
| Height | 2,254 mmcorrect |
| Wheelbase | 1,450 mmcorrect |
| Ground clearance | 184 mmcorrect |
| Unladen weight | 2,090 kgcorrect |
Drivetrain and chassis
| Front tyres | 250/80 R18correct |
|---|---|
| Rear tyres | 250/80 R18correct |
| Top speed | 40 km/hcorrect |
Working data
| Lifting capacity | 2,300 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 26.3 kW/t (55 kW / 2.1 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Bcs MARS L 80 have?
The Bcs MARS L 80 delivers 75 hp.
How much does the Bcs MARS L 80 weigh?
The unladen weight is 2,090 kg.
What engine does the Bcs MARS L 80 have?
4 cylinders, 2,482 cm³ displacement, Diesel.
How fast does the Bcs MARS L 80 go?
Top speed is 40 km/h.
How much does the rear linkage of the Bcs MARS L 80 lift?
The rear linkage lifts 2,300 kg.
What are the dimensions of the Bcs MARS L 80?
3,725 mm × 2,254 mm.
When was the Bcs MARS L 80 built?
Production years: 2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.