Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Bcs › ERA › 9.40

Bcs 9.40 – specifications

Series: ERA

Build year not documented · Data origin: Reference work (Wikipedia/Wikibooks) · sources

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 9.40 is a tractor from the ERA series manufactured by Bcs. This model belongs to the tractor category and is powered by diesel fuel. The design features a water-cooled four-cylinder engine delivering a rated power of 35 hp at a rated speed of 3,400 rpm. The engine displacement is 1,372 cm³. This technical configuration defines the machine's basic profile for agricultural applications.

The 35 hp output enables the handling of light to medium field work and the operation of implements that do not require excessive draft forces. The transmission with 12 forward and 12 reverse gears offers a wide range of speeds, which is advantageous for adapting to various soil conditions and working speeds. The lifting capacity of 700 kg determines the maximum load that can be raised via the three-point hitch. This value specifies which implements, such as plows or mowers, can be safely raised and lowered without exceeding the hydraulic performance limit.

Within the ERA series, the 9.40 is positioned as a model with the stated power and lifting values. Its specific classification relative to other models in this series results from the combination of engine power and lifting capacity. Tractors of this size are typically used for farmyard tasks, light soil cultivation, and operations in orchards or vineyards, where compact dimensions and moderate draft forces are the primary considerations.

Technical data

Engine

Fueldieselcorrect
Power35 hp (26 kW)correct
Rated speed3,400 rpmcorrect
Cylinders4correct
Displacement1,372 cm³correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Gearbox12v + 12rcorrect

Working data

Lifting capacity700 kgcorrect

Frequently asked questions

How much power does the Bcs 9.40 have?

The Bcs 9.40 delivers 35 hp.

What engine does the Bcs 9.40 have?

4 cylinders, 1,372 cm³ displacement, Diesel.

How much does the rear linkage of the Bcs 9.40 lift?

The rear linkage lifts 700 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​‌​‍‍‌‍‌‍‍‌‍⁠⁠‌​‌‍

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare