Backers RE-liner – specifications
Built: 2002 · Series: Other models
Data for the version built 2002 · Data origin: Official register · sources
More machines from model year 2002
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Backers – other models: the collective page of trailers outside the named ranges, 3 MTB, 3-MBZ and RE-Liner, 13,000 to 23,840 kg unladen weight, up to 30,000 kg gross weight
This page gathers the Backers trailers outside the named ranges. The register lists the types 3 MTB, 3-MBZ and RE-Liner, the latter once with the 5600 suffix and once without. All versions are carried as separate registration entries with their technical values.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 13,000 to 23,840 kg, gross weights from 13,000 to 30,000 kg, lengths from 11,850 to 14,270 mm and widths from 2,550 to 2,700 mm.
With unladen weights from 13 tonnes and gross weights of up to 30 tonnes, all versions belong to the heavy trailer class for special and construction-machinery transport, towed behind powerful trucks or run as independent centre-axle trailers on building sites and in industrial use. Widths of up to 2.7 metres run slightly over the standard 2.55-metre measure usual on public roads.
On a used example, axle and brake system condition, rust on the frame and load-bearing parts, the function of air suspension or leaf springs, and tyre and rim condition all count. Parts for trailers of this weight class typically come through independent commercial-vehicle workshops rather than a narrow manufacturer network. On the wider versions, checking frame reinforcements and fitted components also belongs on the pre-drive list. A look at the towing eye, lighting connectors and any signs of overload on the chassis rounds off the check.
Sources: SpecCodex register, model data: Backers (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,850 mmcorrect |
|---|---|
| Width | 2,700 mmcorrect |
| Gross vehicle weight | 13,000 kgcorrect |
Frequently asked questions
What is the gross vehicle weight of the Backers RE-liner?
13,000 kg.
What are the dimensions of the Backers RE-liner?
11,850 mm × 2,700 mm.
When was the Backers RE-liner built?
Production years: 2002.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
