Autech Js Sro AU
Built: 2024 · Series: Other models
More machines from model year 2024
Autech Js Sro AU - class O2 trailer with a gross weight of 3,500 kg, an unladen weight of 1,530 kg, a payload of 1,970 kg, and a length of 10,370 mm and a width of 2,550 mm, built 2024
The register lists exactly one model for Autech Js Sro, the AU, from 2024. With a gross weight of 3,500 kg it falls into class O2 of the EU trailer classification, which covers trailers up to 3,500 kg, and is towed behind cars or light commercial vehicles.
Read on 3 more paragraphs
At a length of 10,370 mm, a width of 2,550 mm and a wheelbase of 6,830 mm, the AU has an unladen weight of 1,530 kg; against the gross weight of 3,500 kg that leaves a payload of 1,970 kg. It runs on 6 wheels and is rated for 80 km/h. For a single model of this size, the ratio of unladen weight to payload shows how much the design is built around the load rather than its own structure.
Trailers in this class usually run an overrun brake: the towing vehicle's deceleration pushes the drawbar linkage together and applies the brake without any separate air system. Towing needs at least a category B licence, provided the combination's total weight stays under the statutory limit, otherwise category BE. Which towing vehicle actually fits depends, besides the gross weight, on the nose weight at the coupling and the type of coupling itself; together they set the practical limit for the load carried.
When buying used, check the condition of axles and wheel bearings, the function of the braking system, corrosion on the frame and drawbar, and the state of lighting, the electrical connector, tyres and rims. Equally important are the load-securing anchor points and even wear of the brake linings across all axles. Exactly one example of this type is registered in the Netherlands, so spare parts are hard to find through normal trade.
Sources: SpecCodex-Register: Kennwerte des Modells Autech Js Sro AU
Technical data
Dimensions and weights
| Length | 10,370 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,830 mmcorrect |
| Unladen weight | 1,530 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 80 km/hcorrect |
Frequently asked questions
How much does the Autech Js Sro AU weigh?
The unladen weight is 1,530 kg.
What is the gross vehicle weight of the Autech Js Sro AU?
3,500 kg.
Up to what speed is the Autech Js Sro AU approved?
Approved up to 80 km/h.
What are the dimensions of the Autech Js Sro AU?
10,370 mm × 2,550 mm.
When was the Autech Js Sro AU built?
Production years: 2024.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.