Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Austin › Other models › BA 3993 cm³

Austin BA 3993 cm³ flatbed truck

Built: 1952 · Series: Other models

More machines from model year 1952

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The BA 3993 cm³ Pritschenwagen comes from Austin. Production: 1952. The engine delivers 50 kW, has 6 cylinders, with a displacement of 3,993 cm³. The vehicle is 5,800 mm long and 2,180 mm wide. The unladen weight is 2,550 kg. Rated output across the Austin range ranges from 26 to 67 kW; the BA 3993 cm³ sits in the middle of that range with 50 kW. Its immediate neighbours are the K4 below it with 49.2 kW and the K5 above it with 62.5 kW. Unladen weight across the Austin range ranges from 630 to 2,960 kg; here the BA 3993 cm³ sits in the upper part of that range with 2,550 kg. 101 Austin models across 9 series are on record.

Austin – other truck models: collective page outside the named ranges, from the wartime three-tonner to the Austin Loadstar, four- and six-cylinder engines, 49.2 to 67 kW, 3,460 to 4,000 cm³

This page gathers Austin trucks the register could not assign to a named range, from simple wartime and post-war three-tonners to the Austin Loadstar of the 1970s and 1980s. Austin was founded in 1905 by Herbert Austin in Longbridge near Birmingham, became part of the British Motor Corporation in 1952 and of the British Leyland group in 1968. The Loadstar was a badge-engineered sister model of the Leyland commercial-vehicle range and was sold under both brand names, while older types such as the K and FG series were Austin's own designs.

Read on 3 more paragraphs

The register lists 37 versions here with 49.2 to 67 kW from four- to six-cylinder engines of 3,460 to 4,000 cm³, kerb weights of 2,300 to 9,120 kg, lengths of 4,580 to 7,550 mm and widths of 1,980 to 2,470 mm.

Austin trucks competed in Britain with Bedford, Commer and sister marque Morris Commercial and were used mainly in trades, municipal work and light haulage. After the merger into British Leyland, the Austin brand disappeared from truck production in favour of Leyland and Freight Rover, making surviving Austin commercial vehicles rare collector's pieces today.

On these older vehicles, key checks include frame and cab corrosion, the condition of leaf springs and drum brakes, and the sealing of the flatbed or box body. The four- and six-cylinder engines should be checked for oil loss at the head and sump gaskets and for the condition of the clutch and gear linkage. New spare parts are barely available any more, with supply running almost exclusively through classic commercial-vehicle clubs and specialist dealers.

Sources: SpecCodex register, model data: Austin (weitere Modelle)

Technical data

Engine

Power50 kWcorrect
Cylinders6correct
Displacement3,993 cm³correct

Dimensions and weights

Length5,800 mmcorrect
Width2,180 mmcorrect
Unladen weight2,550 kgcorrect

Where this model stands

Power-to-weight ratio: 19.6 kW/t (50 kW / 2.5 t)

Stronger than 0% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Austin BA 3993 cm³ have?

The Austin BA 3993 cm³ delivers 50 kW.

How much does the Austin BA 3993 cm³ weigh?

The unladen weight is 2,550 kg.

What engine does the Austin BA 3993 cm³ have?

6 cylinders, 3,993 cm³ displacement.

What are the dimensions of the Austin BA 3993 cm³?

5,800 mm × 2,180 mm.

When was the Austin BA 3993 cm³ built?

Production years: 1952.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare