Atec 2A3500 L – specifications
Built: 2003 · Series: 2A3500
Data for the version built 2003 · Data origin: Official register · sources
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Atec 2A3500 – trailer range at the edge of EU class O2: 3,500 kg gross weight, unladen weights from 940 to 1,880 kg, widths from 2,150 to 2,550 mm
The 2A3500 range brings together several versions of one base model at Atec – 2A3.500, 2A3500 AA, 2A3500 K, 2A3500 L and 2A3500 VV differ in equipment and body, but all carry the same weight figure in their name. The number 3500 in the designation matches the gross weight throughout the range and marks the upper limit of the EU trailer class O2, which covers braked and unbraked trailers up to 3.5 tonnes.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 940 to 1,880 kg at a constant gross weight of 3,500 kg. Widths range from 2,150 to 2,550 mm, and one version has a length of 5,450 mm.
Trailers at the 3.5-tonne threshold are common in both commercial and private use, because a category B licence still covers a combination weight of up to 3,500 kg, while the BE extension removes that limit entirely. The spread of unladen weights within the range, from under 1,000 kg to nearly 1,900 kg, shows that different bodies and payloads sit under the same base type.
Buying one of these trailers used, the condition of axles, wheel bearings and brakes, rust on the chassis and drawbar, the function of the overrun brake and the tightness of the sides or tarpaulin all matter. Lighting, number-plate lighting and a valid roadworthiness inspection are part of the check before taking it over, along with tyre tread and age.
Sources: SpecCodex register, model data: Atec 2A3500
Technical data
Dimensions and weights
| Width | 2,150 mmcorrect |
|---|---|
| Coupling-to-axle distance | 760 mmcorrect |
| Unladen weight | 1,280 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Atec 2A3500 L weigh?
The unladen weight is 1,280 kg.
What is the gross vehicle weight of the Atec 2A3500 L?
3,500 kg.
Up to what speed is the Atec 2A3500 L approved?
Approved up to 100 km/h.
When was the Atec 2A3500 L built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
