Atec 2 AV 3500
Built: 1999-1999 · Series: Trailers up to 3.5 t (Class O2)
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Atec car trailers up to 3.5 t (class O2) – the largest Dutch horse-trailer maker, 1 A/2 A type codes for axle count: 516 versions, kerb weight 200 to 3,180 kg
Atec Aanhangwagens, based in Rijen in North Brabant, is regarded as the largest Dutch maker of horse trailers and by its own account supplies more than 3,500 vehicles a year to dealers at home and abroad. This class O2 collective page gathers all Atec trailers with a gross weight of 0.75 to 3.5 tonnes; type designations almost always start with "1 A" for single-axle or "2 A" for tandem-axle chassis, followed by the weight class in kilograms such as 1300, 2000, 2500 or 3500, sometimes with a letter for equipment level (K for the horse-transport version, G for enclosed).
Read on 3 more paragraphs
The register lists 516 versions with kerb weights from 200 to 3,180 kg, gross weights from 800 to 3,500 kg and widths from 1,350 to 2,550 mm; lengths are recorded for only 59 models and range from 3,170 to 8,080 mm.
Its focus on horse transport puts Atec alongside Böckmann and Humbaur in a segment where ventilation, partitions and ride comfort for the animals matter as much as payload; the page also covers plain load and box trailers.
When buying used, check the coupling head and overrun brake, the state of the axles and rubber-torsion suspension, frame corrosion especially at the axle mounts and the often moisture-exposed floor, the lighting system, the condition of tarpaulin, partitions and bodywork, and tyre age; parts are supplied through Atec's Dutch dealer network.
Sources: Kennwerte der Modelle Atec Anhänger
Technical data
Dimensions and weights
| Width | 1,910 mmcorrect |
|---|---|
| Wheelbase | 760 mmcorrect |
| Unladen weight | 740 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Atec 2 AV 3500 weigh?
The unladen weight is 740 kg.
What is the gross vehicle weight of the Atec 2 AV 3500?
3,500 kg.
Up to what speed is the Atec 2 AV 3500 approved?
Approved up to 100 km/h.
When was the Atec 2 AV 3500 built?
Production years: 1999.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.