Ataf AZ 405 – specifications
Built: 1979 · Series: Other models
Data for the version built 1979 · Data origin: Official register · sources
More machines from model year 1979
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ataf – other models: collective page outside the named ranges with the A, Abt, Ae, Aet and Az model lines, gross weight from 1 to 5.4 t for light to medium-duty trailers
This page gathers Ataf trailers that the register could not assign to a named range. The range splits into several parallel letter series – among them A, ABT, AE, AET and AZ – each followed by a multi-digit model number distinguishing the individual versions within the series; the span runs from light single-axle trailers to tandem-axle versions at the upper end of the weight range.
Read on 3 more paragraphs
The register lists here 65 versions with unladen weights from 230 to 5,275 kg, gross vehicle weights from 1,000 to 5,400 kg and widths from 1,570 to 2,550 mm.
The wide span from small single-axle trailers to tandem-axle versions with a gross weight of more than five tonnes places Ataf in the segment of versatile utility trailers for trade and agricultural businesses, a field occupied across Europe by numerous regional makers alongside the large brand names. Such trailers serve trades for tool and material transport, agriculture for feed and harvest transport, and landscaping and garden work.
When buying used, what counts on every version is the condition of the axle, wheel bearings and braking system, corrosion on the frame, drawbar and overrun brake, and the condition of the lighting; on the heavier tandem-axle models also the condition of the load bed and any sideboards. On trailers in frequent commercial use, the jockey wheel and coupling head are worth an extra look. Spare parts for axles and brakes are available through the general trailer accessory trade.
Sources: SpecCodex register, model data: Ataf (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,480 mmcorrect |
|---|---|
| Coupling-to-axle distance | 556 mmcorrect |
| Unladen weight | 4,640 kgcorrect |
| Gross vehicle weight | 5,150 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Ataf AZ 405 weigh?
The unladen weight is 4,640 kg.
What is the gross vehicle weight of the Ataf AZ 405?
5,150 kg.
Up to what speed is the Ataf AZ 405 approved?
Approved up to 100 km/h.
When was the Ataf AZ 405 built?
Production years: 1979.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
