Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Antonio Carraro › Tony › 8700 V

Antonio Carraro 8700 V

Built: 2022 · Series: Tony

More machines from model year 2022

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 8700 V from Antonio Carraro is part of the Tony series. Production: 2022. The engine delivers 75.3 hp (55.4 kW), has 4 cylinders. Rated speed is 2,200 rpm. The unladen weight is 2,725 kg. The engine is water-cooled. Tyres: front 260/70 R16, rear 360/70 R20. The fuel is diesel. Construction: unit construction (no separate frame). Rated output across the Antonio Carraro range ranges from 18.5 to 98 hp; the 8700 V sits in the upper part of that range with 75.3 hp. Its immediate neighbours are the Infinity 7600 TTR below it with 75 hp and the Ergit 100 SRX 9900 above it with 85 hp. Rated output across the Antonio Carraro range ranges from 18.5 to 98 hp; here the 8700 V sits in the upper part of that range with 75.3 hp. 67 Antonio Carraro models across 12 series are on record.

Antonio Carraro Tony 8700 V: the block-construction four-wheel-drive compact tractor from the Italian maker, a four-cylinder diesel of 55.4 kW, built in 2022

Antonio Carraro is an Italian family business from the Padua area, specialising in compact tractors for specialty crops and municipal use. The 8700 V belongs to the Tony range and dates from 2022.

Read on 3 more paragraphs

The tractor is built in block construction, in which the engine and gearbox themselves form the load-bearing frame. The water-cooled four-cylinder diesel produces 55.4 kW (75.3 hp) at 2,200 rpm, drive goes to all four wheels with tyres of 260/70 R16 at the front and 360/70 R20 at the rear; unladen weight is 2,725 kg. At this weight and output, the result is a strong but not over-engined specification for a compact tractor.

Block construction saves weight and build height compared with a separate vehicle frame and is common on compact tractors that need to be manoeuvrable in tight spaces. With four-wheel drive and differently sized tyres front and rear, the tractor is built for good traction and gentler ground contact when working smaller, often difficult plots. The different tyre sizes also balance out the different force transmission of the front and rear axles.

On a vehicle of this model year, what matters most is the operating hours, the condition of the hydraulic couplings for changing implements, the four-wheel-drive clutch, and the tyres in the different sizes given front and rear. The brake system and the electrical connections for mounted implements should also be checked. Spare parts run through the Antonio Carraro dealer network.

Sources: SpecCodex-Register: Kennwerte des Modells 8700 V, Antonio Carraro (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power75.3 hp (55.4 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Coolingwater-cooledcorrect

Dimensions and weights

Unladen weight2,725 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Front tyres260/70 R16correct
Rear tyres360/70 R20correct

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 20.3 kW/t (55 kW / 2.7 t)

Power class: Universal (40–100 hp)

Stronger than 52% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Antonio Carraro 8700 V have?

The Antonio Carraro 8700 V delivers 75.3 hp.

How much does the Antonio Carraro 8700 V weigh?

The unladen weight is 2,725 kg.

What engine does the Antonio Carraro 8700 V have?

4 cylinders, Diesel.

When was the Antonio Carraro 8700 V built?

Production years: 2022.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare