Amphitec RIVACARRIER
Built: 2006-2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Amphitec – other models: vacuum and heavy-haul trailers from the VACUTRAILER 2000 to the Max-Loader, 750 to 14,900 kg unladen weight, 2.7 to 38 t gross weight
This page gathers the Amphitec models the register could not assign to a named range – two very different trailer types under one roof. The VACUTRAILER 2000 and 2700 are vacuum tank trailers, whose number gives the capacity, while the Max-Loader, Maxloader and Rivacarrier are heavy-haul trailers for construction machinery and oversized loads. Both ranges show how varied the range of a specialised trailer manufacturer can be when serving customers from farming, waste management and construction alike.
Read on 3 more paragraphs
The register lists here 7 versions with unladen weights from 750 to 14,900 kg, gross weights from 2,700 to 38,000 kg, lengths from 8,760 to 9,580 mm and widths from 2,120 to 2,550 mm.
Vacuum trailers of this kind carry slurry, sewage sludge or industrial liquids and are loaded and unloaded through a vacuum pump, while the heavy-haul trailers are built for excavators, wheel loaders and other construction machinery and are used in construction and earthmoving.
On a used example, the condition of tank, pump and fittings and the tightness of the connections matter most on vacuum trailers, while frame, axles and brakes and the condition of the deck and ramps matter on the heavy-haul trailers; parts run through Amphitec and independent trailer workshops. Given how specialised these trailers are, a documented service and inspection history is worth checking closely before purchase.
Technical data
Dimensions and weights
| Width | 2,420 mmcorrect |
|---|---|
| Wheelbase | 780 mmcorrect |
| Unladen weight | 750 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Amphitec RIVACARRIER weigh?
The unladen weight is 750 kg.
What is the gross vehicle weight of the Amphitec RIVACARRIER?
3,500 kg.
Up to what speed is the Amphitec RIVACARRIER approved?
Approved up to 100 km/h.
When was the Amphitec RIVACARRIER built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.