Allis Gleaner Corporation RT-95
Built: 2002–2004 · Series: RT - Baureihe
More machines from model year 2002
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Allis Cleaner Corporation RT range – eight six-cylinder diesels from RT-95 to RT-150: 71 to 110 kW, 5.9 to 6.8 litres displacement, unladen weights up to 7.4 tonnes
The register lists these eight tractors under the designation Allis Cleaner Corporation, in the RT type series, whose numbers from RT-95 to RT-150 order the range in ascending size. All eight versions are six-cylinder diesels of 5,883 to 6,830 cm³, running at around 2,200 rpm – a single engine family across the whole range.
Read on 3 more paragraphs
The register lists 8 versions with 71.3 to 110.3 kW from six-cylinders of 5,883 to 6,830 cm³, torque from 422 to 747 Nm, unladen weights from 4,717 to 7,446 kg, lengths from 4,394 to 5,030 mm, widths from 2,250 to 2,989 mm and heights from 2,235 to 3,050 mm.
With outputs of roughly 100 to about 150 hp and weights of over seven tonnes, the RT range sits in the class of heavy agricultural tractors used for tillage and transport in large-scale arable farming. The consistent six-cylinder layout across all eight models points to a single engine family with graduated power steps.
On used tractors of this class, operating hours and the condition of the six-cylinder diesel count, along with the tightness of the injection pump and charge-air ducting, the condition of clutch and gearbox, wear on axles and tyres, and the tightness of the hydraulics. On the heavier models of the range it is also worth checking frame and mounting brackets, which are the first to show fatigue cracks under sustained load.
Sources: SpecCodex register, model data: Allis Cleaner Corporation RT
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 97 hp (71.3 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 440 Nmcorrect |
| Speed at max. torque | 1,500 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,883 cm³correct |
| Bore | 102 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 17.4correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,394 mmcorrect |
|---|---|
| Width | 2,880 mmcorrect |
| Height | 2,235 mmcorrect |
| Wheelbase | 2,739 mmcorrect |
| Ground clearance | 460 mmcorrect |
| Unladen weight | 4,717 kgcorrect |
Drivetrain and chassis
| Drive | rear- and four-wheel drivecorrect |
|---|---|
| Gearbox | 32 V/32 Rcorrect |
| Front tyres | 10.00-16 ASF (4 WD: 13.6 R 28 AS)correct |
| Rear tyres | 18.4 R 38 AScorrect |
| Top speed | 40 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 15.1 kW/t (71 kW / 4.7 t)
Power class: Universal (40–100 hp)
Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Allis Gleaner Corporation RT-95 have?
The Allis Gleaner Corporation RT-95 delivers 97 hp.
How much does the Allis Gleaner Corporation RT-95 weigh?
The unladen weight is 4,717 kg.
What engine does the Allis Gleaner Corporation RT-95 have?
6 cylinders, 5,883 cm³ displacement, Diesel.
How fast does the Allis Gleaner Corporation RT-95 go?
Top speed is 40 km/h.
What are the dimensions of the Allis Gleaner Corporation RT-95?
4,394 mm × 2,880 mm × 2,235 mm.
When was the Allis Gleaner Corporation RT-95 built?
Production years: 2002–2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
