Allis Chalmers AC130
Built: 2009-2009 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 2009, the Allis Chalmers AC130 is a tractor from Allis Chalmers. The engine produces 17 kW.
It runs on gas. Within the range, rated power spans from 2 to 863 kW; with 17 kW, the AC130 sits in the lower third. Directly alongside are the A with 16 kW below and the D-270 with 17.7 kW above.
Technical data
Engine
| Engine make | Briggs & Strattoncorrect |
|---|---|
| Fuel | gascorrect |
| Power | 23 hp (17 kW)correct |
| Naturally aspirated | naturally aspiratedcorrect |
Origin and approval
| Plant | Port Washington, Wisconsin, USAcorrect |
|---|
Frequently asked questions
How much power does the Allis Chalmers AC130 have?
The Allis Chalmers AC130 delivers 23 hp.
When was the Allis Chalmers AC130 built?
Production years: 2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.