Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Allied › Other models › 222B

Allied 222B – specifications

Series: Other models

Build year not documented · Data origin: Reference work (Wikipedia/Wikibooks) · sources

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Allied 222B is a tractor from Allied. The engine is rated at 16 kW.

It runs with MFWD.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 16 to 24 kW; with 16 kW, the 222B sits at the bottom end. The next one up is the 243F with 18 kW.

Allied – other models: the collective page of small tractors outside the named ranges, 222 to 3504 HD, 16 to 24 kW (22 to 32 hp), all diesel engines

This page gathers the Allied tractors the register could not assign to a named range – a line of small tractors from the 222 to the 3504 type, in which the HD (Heavy Duty) suffix marks a reinforced version and the letters B and F further variants of the respective base type.

Read on 4 more paragraphs

The register lists here 7 versions, all with a diesel engine, with 16 to 24 kW, or 22 to 32 hp.

Small tractors of this power class are typical yard and municipal machines for transport, mowing and light earthworks, used on small and part-time holdings and by municipal maintenance depots.

Buyers of used units should check the engine and clutch for operating hours and oil condition, on HD versions additionally the gearbox and axles for the promised higher load capacity, as well as the hydraulics, brakes and rust on the bodywork; parts for this smaller brand generally can only be sourced through specialist dealers or as reproduction parts. It is also worth checking the seat mounting and controls for completeness, since individual fittings on small ranges are often lost over the years.

With rated outputs from 16 to 24 kW, these small Allied tractors fall within ISO 730 Category I for the rear three-point hitch, with a power take-off that in this power class typically runs at 540 revolutions per minute, sufficient for light implements such as mowers and trailers.

Sources: SpecCodex register, model data: Allied – weitere Modelle

Technical data

Engine

Fueldieselcorrect
Power22 hp (16 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantChinacorrect

Frequently asked questions

How much power does the Allied 222B have?

The Allied 222B delivers 22 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​‌‍⁠​⁠​‌‍​​⁠‌​​​‌​‍‌

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare