Alco PCF 4.2-35
Built: 1995-1997 · Series: Other models
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Alco – other models: the collective page of commercial vehicles outside the named ranges, with the types 230, 280 and PCF 4.2-35, four-cylinder diesels of around 2,500 cm³, 2,436 to 3,100 kg kerb weight and up to 3
This page gathers the commercial vehicles carried under the Alco brand that the register could not assign to a named range: the types 230, 280 and PCF 4.2-35. All three are four-cylinder diesel vehicles of the light commercial class with a displacement of around 2,500 cm³ and a width between 2,140 and 2,360 mm, typical of closed box bodies and flatbeds with a driver's cab.
Read on 3 more paragraphs
The register lists here 3 versions with a displacement of 2,500 cm³ from four cylinders, kerb weights from 2,436 to 3,100 kg, gross weights from 3,100 to 3,500 kg and widths from 2,140 to 2,360 mm.
With a gross weight of up to 3,500 kg, all three types fall into the light commercial class that can be driven on an ordinary car licence, and registration registers regularly carry, alongside the big series makers, small brands and conversions rarely seen on the road but recorded in the vehicle stock of individual countries.
On a used example of one of these three types, as with any commercial vehicle of this weight class, the condition of frame and body, rust on the floor, sills and load bed, the condition of clutch, brakes and axles and the service history of the four-cylinder diesel all count; with small brands and short production runs, parts supply is worth checking before purchase, as it often runs only through specialist workshops or independent suppliers.
Sources: SpecCodex register, model data: Alco (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,500 cm³correct |
Dimensions and weights
| Width | 2,360 mmcorrect |
|---|---|
| Wheelbase | 4,530 mmcorrect |
| Unladen weight | 3,100 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Alco PCF 4.2-35 weigh?
The unladen weight is 3,100 kg.
What is the gross vehicle weight of the Alco PCF 4.2-35?
3,500 kg.
What engine does the Alco PCF 4.2-35 have?
4 cylinders, 2,500 cm³ displacement.
When was the Alco PCF 4.2-35 built?
Production years: 1995-1997.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
