Ajk AEE/10-20
Built: 1988 · Series: Other models
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ajk – other models: the collective page of heavy O4-class semi-trailers outside the named ranges, 20 to 47 tonnes gross weight, 3,440 to 13,840 kg unladen weight, 8,620 to 11,770 mm long
This page gathers the Ajk trailers the register could not assign to a named range. With gross weights from 20 to 47 tonnes, these are heavy O4-class semi-trailers; one model is named explicitly Auflieger-Kipper (tipping semi-trailer). The type codes AE, AET and OP mark different build lines, supplemented by number pairs for payload and axle count and the tyre size (around 22.5 inches); the R in designations such as AETLR marks a further chassis variant of the line.
Read on 3 more paragraphs
The register lists here 28 versions with unladen weights from 3,440 to 13,840 kg, gross weights from 20,000 to 47,000 kg, widths from 2,450 to 2,550 mm and lengths from 8,620 to 11,770 mm.
Tipping semi-trailers of this weight class are used for hauling building materials, excavated earth and recycling loads, competing with ranges from makers such as Meiller, Fliegl and Carnehl; the span from 20 to 47 tonnes gross weight covers both two-axle and multi-axle versions for heavy-duty use.
On a used example, the condition of the tipping body and its seals, the function of the tipping ram and hydraulics, axles, brakes and tyres, the frame for cracks and wear at the bearings, and the underrun guard and lighting system count, along with the condition of the mudguards; spare parts run through the specialist commercial-vehicle trade.
Sources: SpecCodex register, model data: Ajk (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 3,900 mmcorrect |
| Unladen weight | 4,430 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Ajk AEE/10-20 weigh?
The unladen weight is 4,430 kg.
What is the gross vehicle weight of the Ajk AEE/10-20?
20,000 kg.
Up to what speed is the Ajk AEE/10-20 approved?
Approved up to 100 km/h.
When was the Ajk AEE/10-20 built?
Production years: 1988.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
-
AEE
AEEL / 10 - 20 / 19,5
AEEL/10-20/19.5
AEEL/1020/19,5
AET
AETL/ 10-28/19,5
AETL/10-28/19
AETL/10-30/195
AETLR/10-28/22.5
AETPR 10-28/22.5
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.