StartTractorsAgtor › A250

Agtor A250

Built: 1995-1995 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Built in 1995, the Agtor A250 is a tractor from Agtor. It is powered by a six-cylinder engine producing 190 kW.

Within the range, rated power spans from 17 to 190 kW; with 190 kW, the A250 sits at the top. Below it ranks the A230 with 170 kW.

Technical data

Engine

Engine makeCummins; Fiatcorrect
Power250 hp (190 kW)correct
Cylinders6correct

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Forward gears12correct
Reverse gears3correct

Frequently asked questions

How much power does the Agtor A250 have?

The Agtor A250 delivers 250 hp.

What engine does the Agtor A250 have?

6 cylinders.

When was the Agtor A250 built?

Production years: 1995.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare