Agtor A200
Built: 1995-1995 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Agtor A200 is a tractor built in 1995. The six-cylinder engine produces 150 kW.
Within the range, rated power spans from 17 to 190 kW; with 150 kW, the A200 sits in the upper third. Directly alongside are the 16245 with 121 kW below and the A230 with 170 kW above.
Technical data
Engine
| Engine make | Cumminscorrect |
|---|---|
| Engine model | 6CT8.3correct |
| Power | 200 hp (150 kW)correct |
| Cylinders | 6correct |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|---|
| Forward gears | 10correct |
| Reverse gears | 2correct |
Frequently asked questions
How much power does the Agtor A200 have?
The Agtor A200 delivers 200 hp.
What engine does the Agtor A200 have?
6 cylinders.
When was the Agtor A200 built?
Production years: 1995.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.