Technical register for agricultural, construction and commercial machinery · sourced data

AGCO Massey Ferguson MF 5711

Built: from 2015 · Series: MF 5700 Global Series

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGCO Massey Ferguson MF 5711 is a model in the MF 5700 Global Series. The engine delivers 110 hp, has 4 cylinders, with a displacement of 4,400 cm³. Rated speed is 2,200 rpm. The unladen weight is 4,300 kg. The wheelbase measures 2,430 mm. Top speed is 40 km/h. Transmission: Dyna Synchroshift 12/12. The engine is water-cooled. The fuel is Diesel und AdBlue. Rated output across the AGCO Massey Ferguson range ranges from 36 to 400 hp; the MF 5711 sits in the lower part of that range with 110 hp. Its immediate neighbours are the MF 4360 (A) below it with 106 hp and the MF 4365 (A) above it with 112 hp. Unladen weight across the AGCO Massey Ferguson range ranges from 2,385 to 10,800 kg; here the MF 5711 sits in the lower part of that range with 4,300 kg. 146 AGCO Massey Ferguson models across 33 series are on record.

AGCO Massey Ferguson MF 5700 Global Series – built in Beauvais, France: MF 5710 and MF 5711, AGCO Power four-cylinder, 4,400 cm³, 75 kW, AdBlue as standard

The MF 5700 Global Series forms the next class up from the MF 4700 within AGCO's platform for growth markets and is built in Beauvais, France. The MF 5710 and MF 5711 models share the AGCO Power four-cylinder engine and both come with AdBlue exhaust aftertreatment as standard, unlike the smaller 4700 class with its mixed engine line-up.

Read on 3 more paragraphs

The register lists 2 versions here with 75 kW from the four-cylinder diesel engine of 4,400 cm³ displacement, at 2,200 revolutions per minute. Kerb weight is 4,300 kg.

With its Beauvais location, where AGCO also builds larger Massey Ferguson series, the MF 5700 Global Series combines the range's simple, rugged design with the manufacturing depth of the European home plant. It targets farms in growth markets seeking a versatile mid class between the compact entry model and the large standard tractors, for tillage, haulage and work with powered implements alike.

When buying used, the AdBlue tank and lines and the particulate filter should be checked for correct operation, since a neglected exhaust aftertreatment system leads to power loss. Clutch, hydraulic pump and front-axle bearings also deserve attention, along with the condition of the cab mounts and wiring loom under everyday field use; spare parts are supplied by AGCO through its dealer network.

Sources: SpecCodex register, model data: Massey Ferguson MF 5700 Global Series, Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

FuelDiesel und AdBluecorrect
Power110 hpcorrect
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,400 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Wheelbase2,430 mmcorrect
Unladen weight4,300 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
GearboxDyna Synchroshift 12/12correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 18.8 kW/t (81 kW / 4.3 t)

Power class: Large (100–180 hp)

Stronger than 70% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the AGCO Massey Ferguson MF 5711 have?

The AGCO Massey Ferguson MF 5711 delivers 110 hp.

How much does the AGCO Massey Ferguson MF 5711 weigh?

The unladen weight is 4,300 kg.

What engine does the AGCO Massey Ferguson MF 5711 have?

4 cylinders, 4,400 cm³ displacement, Diesel und AdBlue.

How fast does the AGCO Massey Ferguson MF 5711 go?

Top speed is 40 km/h.

When was the AGCO Massey Ferguson MF 5711 built?

Production years: 2015–?.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare