Ptech Other models
2 models in this series
Ptech – other models: the collective page of trailers outside the named ranges, KIP44-4 and KIP44-5, 7,515 to 7,770 kg unladen weight, 40,000 to 45,000 kg gross weight
This page gathers the Ptech trailers the register could not assign to a named range – with only two versions this amounts to the whole programme listed here. The types KIP44-4 and KIP44-5 share the core designation KIP44 and differ only in the last digit, pointing to two closely related version variants. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 7,515 to 7,770 kg, gross weights from 40,000 to 45,000 kg, lengths from 12,260 to 12,625 mm and a width of 2,550 mm.
With gross weights of 40 to 45 tonnes against just over 7.5 tonnes unladen weight, both versions offer a payload reserve of around 32 to 37 tonnes and fall into the range of heavy semi-trailers for heavy-haul traffic behind suitably rated tractor units; driving such combinations requires a category CE licence.
On a used example of this size, the condition of axles, brake system and fifth-wheel coupling, rust on frame and side rails, the state of locks and load-bed body, and tyres and rims all count in particular; given the large payload reserve, wear on the axle units is also worth a look. Parts for such small brands usually run through independent commercial-vehicle workshops.
Sources: SpecCodex register, model data: Ptech (weitere Modelle)
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
