Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Oy Scan Auto › Other models

Oy Scan Auto Other models

2 models in this series

Oy Scan Auto Scania-Stamford – EU class O3 generator-set trailer with a 7,500 kg gross weight, 8,250 mm length and 2,550 mm width

The model name combines Scania, a Swedish engine maker, with Stamford, a British brand of generators and alternators; this pairing of diesel engine and generator is the classic layout of a mobile power set. With a gross weight of 7,500 kg, the trailer falls into EU class O3, the 3.5 to 10 tonne band.

Read on 3 more paragraphs

At 8,250 mm long and 2,550 mm wide, the trailer is sized so that the engine, generator, sound enclosure and fuel tank all fit on a shared load bed. Unlike a plain transport trailer, it is the fixed power unit rather than the payload that sets the gross weight here, since almost nothing is left over for additional cargo once the generator set itself is mounted.

Class O3 requires an air brake system, and towing calls for driving licence category BE or C1E depending on the tractor vehicle. Mobile generator sets of this kind are used on construction sites, at events, or as backup power for critical infrastructure where a fixed supply is missing or has failed.

When buying a generator trailer of this kind used, the engine and generator themselves deserve most attention: running hours, oil condition, and the state of the windings and sound enclosure. On the chassis side, check the air brake, axles and frame under the heavy body for rust and cracks, and confirm that the fuel tank and its lines show no signs of leakage.

Sources: SpecCodex-Register: Kennwerte des Modells Oy Scan Auto Scania-Stamford

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare