Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › FEENSTRA › Other models

FEENSTRA Other models

4 models in this series

FEENSTRA – other models: the collective page of trailers outside the named ranges, with C822, F1PTW-1, F2-PTW and F2-PTW2, 454 to 1,400 kg unladen weight, 1,200 to 1,920 kg gross weight

This page gathers the FEENSTRA trailers the register could not assign to a named range – with such a small model programme this amounts to practically the whole catalogue of the brand. The four listed types are C822, F1PTW-1, F2-PTW and F2-PTW2; the designations alone give no series order or size sequence.

Read on 3 more paragraphs

The register lists here 4 versions with unladen weights from 454 to 1,400 kg, gross weights from 1,200 to 1,920 kg and widths from 1,620 to 2,190 mm.

With gross weights from 1.2 to just under 2 tonnes, all four types fall into the braked trailer class up to 3.5 tonnes, towed behind vans and stronger cars. The unladen weight range from 454 to 1,400 kg points to very different bodies within the programme, from light to heavier versions. For registration behind a car, besides the trailer's gross weight the tow vehicle's rated towing capacity is also decisive, since it sets the load actually available. This spread means the usable payload varies considerably between the four types, depending on which specific version is chosen.

On a used example, axle and wheel-bearing condition, the function of the overrun brake and its linkage, rust on frame and drawbar, and the state of lighting, plug, tyres and rims all count. Parts for such a small brand usually come through independent trailer workshops rather than a manufacturer network.

Sources: SpecCodex register, model data: FEENSTRA (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare