Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Ez Loader › Other models

Ez Loader Other models

8 models in this series

EZ Loader – other models: the collective page of US boat trailers outside the named ranges, EZT and TM type codes, unladen weights from 260 to 840 kg, gross weights from 1,280 to 3,500 kg, lengths up to 8,800 mm

This page gathers the EZ Loader boat trailers the register could not assign to a named range. The company, based in Spokane, Washington, builds boat trailers with roller or bunk supports; type designations such as EZT 2000, EZT 2600 or TM 8/7000 combine a range code with number codes for size and capacity.

Read on 3 more paragraphs

The register lists here 8 versions with unladen weights from 260 to 840 kg, gross weights from 1,280 to 3,500 kg, lengths from 5,900 to 8,800 mm and widths from 2,240 to 2,480 mm.

With unladen weights under a tonne and lengths up to 8.8 metres, these are typical trailers for larger power and sailing boats as common in North America; the low unladen mass relative to length is typical of the open frame construction with rollers or bunks rather than a closed load bed. In Europe, boat trailers of this design are rarer and usually imported individually rather than sold through a wide dealer network.

On used boat trailers, corrosion of the frame and axle from contact with water, the condition of the rollers, bunks and winch, the function of the brake system and lights after submersion and bearing play in the wheel hubs all count in particular; saltwater-rated versions are recognised by a galvanised or stainless frame. A history of saltwater use clearly affects the price. Photographs from earlier launches can help verify how the trailer was used.

Sources: SpecCodex register, model data: Ez Loader (weitere Modelle), EZ Loader Boat Trailers (manufacturer)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare