Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › DUECKER › Other models

DUECKER Other models

7 models in this series

Dücker – other models: the collective page of trailers outside the named ranges, from HM 140 and HM 160 to HM 250 and HM 560, 850 to 2,200 kg unladen and gross weight

This page gathers the Dücker trailers the register could not assign to a named range. Alongside the general Dücker model, the register lists the HM type series with the steps HM 140, HM 160, HM 200, HM 250 and HM 560, the number rising with weight and so clearly ordering the size step within the series.

Read on 3 more paragraphs

The register lists here 7 versions with unladen and gross weights of 850 to 2,200 kg, a length of 3,980 mm and widths of 1,420 to 1,900 mm.

The span from just under a tonne to 2.2 tonnes covers the braked trailer class from the small single-axle unit to the heavier tandem trailer, towed behind cars, vans and smaller commercial vehicles. For registration, besides the trailer's gross weight the tow vehicle's rated towing capacity is always decisive as well.

On a used example, axle and wheel-bearing condition, the function of the overrun brake and its linkage, rust on frame and drawbar, the state of lighting and plug, and tyres and rims all count; on the heavier HM steps the condition of the brake linings and suspension as well. Parts for such a small brand usually run through independent trailer workshops rather than a maker's own network, so matching the exact HM step against the data plate before ordering is worthwhile, especially as weight and dimensions vary noticeably between the smallest and largest step.

Sources: SpecCodex register, model data: Dücker (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare