ARDAX Other models
2 models in this series
Ardax – remaining models: the collective page for trailers outside the named series, 4X2 T and 4X2T, 980 to 1,060 kg kerb weight, 1,300 to 2,600 kg gross vehicle weight
This page brings together the Ardax trailers that the register does not assign to a named series; the two versions, 4X2 T and 4X2T, make up the entire range recorded here. Both models are recorded in the register with complete weight and width values, despite their near-identical type names.
Read on 3 more paragraphs
The register lists 2 versions here with kerb weights from 980 to 1,060 kg, gross vehicle weights from 1,300 to 2,600 kg and widths from 2,050 to 2,070 mm.
With gross vehicle weights of 1.3 to 2.6 tonnes and an almost identical kerb weight of around one tonne, the payload ranges from around 300 kg to over 1.5 tonnes depending on the version; both versions fall into the braked trailer class for cars and vans. The near-identical width of the two models despite such different permitted payloads points to different reinforcement of the frame and axle within the same basic dimensions. For a buyer, this means it is worth checking carefully before purchase which of the two versions carries the heavier axle.
When buying used, check the condition of the axle and wheel bearings, the operation of the overrun brake and its linkage, corrosion on the frame and drawbar, and the condition of the lighting and plug connector; on the heavier version, also check the load capacity of the axle and tyres. Because of the near-identical type names, it is also worth matching the exact model number against the vehicle documents. Spare parts for such a small brand usually come from independent trailer workshops.
Sources: SpecCodex register, model data: Ardax (weitere Modelle)
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
