ALUTRAIL Other models
2 models in this series
Alutrail – remaining models: the collective page for trailers outside the named series, 26 TL 31.16 and Alutrail, 306 to 472 kg kerb weight, 1,400 to 2,600 kg gross vehicle weight
This page brings together the Alutrail trailers that the register does not assign to a named series; the two models, 26 TL 31.16 and Alutrail, make up the entire range recorded here. Both versions are recorded in the register with complete weight, length and width values.
Read on 3 more paragraphs
The register lists 2 versions here with kerb weights from 306 to 472 kg, gross vehicle weights from 1,400 to 2,600 kg, a length of 4,450 mm and widths from 2,050 to 2,290 mm.
With a kerb weight from around 300 kg and a payload reaching over two tonnes, the two versions cover a wide range from light to medium-heavy trailer; both fall into the braked trailer class for cars and vans. At a width of over two metres, the versions suit closed bodies or ones fitted with side panels rather than narrow, single-axle loads. The two versions therefore differ noticeably in permitted payload despite similar length and width, pointing to different uses within the same basic dimensions.
When buying used, check the condition of the axle and wheel bearings, the operation of the overrun brake and its linkage, corrosion on the frame and drawbar, and the condition of the lighting and plug connector. On trailers of this width, it is also worth checking the condition of the tarpaulin or side panels and the load capacity of the tyres. Spare parts for such a small brand usually come from independent trailer workshops.
Sources: SpecCodex register, model data: Alutrail (weitere Modelle)
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
