YTO YL25

Series: YTO Pneumatic Roller

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The YL25 from YTO is part of the YTO Pneumatic Roller series. The engine delivers 136.1 hp (100.1 kW). Rated speed is 2,000 rpm. The machine is 2,792 mm wide. The wheelbase measures 3,630.2 mm. Top speed is 23 km/h. The tank holds 160.1 litres. The engine fitted is the 6BT5,9. Rated output across the YTO range ranges from 69.3 to 220.3 hp; the YL25 sits in the middle of that range with 136.1 hp. Its immediate neighbours are the ZL30 below it with 125.1 hp and the LSS218A above it with 179.6 hp. 82 YTO models across 12 series are on record. The model is listed under Road construction. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine model	6BT5.9correct
Power	136.1 hp (100.1 kW)correct
Rated speed	2,000 rpmcorrect

Dimensions and weights

Width	2,792correct
Wheelbase	3,630.2correct

Drivetrain and chassis

Top speed	23 km/hcorrect

Working data

Fuel tank capacity	160.1 lcorrect

Frequently asked questions

How much power does the YTO YL25 have?

The YTO YL25 delivers 136 hp.

How fast does the YTO YL25 go?

Top speed is 23 km/h.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →