Start › Road construction › YTO › LRS1016

YTO LRS1016

Series: YTO Pneumatic Roller

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The YTO Pneumatic Roller series from YTO includes the LRS1016. The engine delivers 102 hp (75 kW). Rated speed is 2,400 rpm. The wheelbase measures 3,700.3 mm. Top speed is 14 km/h. The tank holds 240.4 litres. The engine fitted is the 4BT3,9. Rated output across the YTO range ranges from 69.3 to 220.3 hp; the LRS1016 sits in the lower part of that range with 102 hp. Its immediate neighbours are the D.Brown FT 100 below it with 101 hp and the YZC12 above it with 112.1 hp. 82 YTO models across 12 series are on record. The model is listed under Road construction. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine model	4BT3.9correct
Power	102 hp (75 kW)correct
Rated speed	2,400 rpmcorrect

Dimensions and weights

Width	2,292.1correct
Wheelbase	3,700.3correct

Drivetrain and chassis

Top speed	14 km/hcorrect

Working data

Fuel tank capacity	240.4 lcorrect

Frequently asked questions

How much power does the YTO LRS1016 have?

The YTO LRS1016 delivers 102 hp.

How fast does the YTO LRS1016 go?

Top speed is 14 km/h.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →