Yanmar eG140i
Series: eG-i Series
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Cylinders | 3correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Dry weight | 278 kgcorrect |
|---|
Other data
| Apparent power | 11.0 (Stand-by) / 10.2 (Prime)correct |
|---|---|
| Dimensions | 1184 x 670 x 770 (LxWxH)correct |
| Displacement | 784 lcorrect |
| Frequency | 50/60correct |
| Fuel tank capacity | 40.7 lcorrect |
| Noise level db | 64.0 (25% Last) / 66.0 (70% Last) / 68.0 (100% Last), 7mcorrect |
| Output kw standby | 11correct |
| Phases | singlecorrect |
| Prime power | 10.2correct |
| Speed | 2300-3400 (variabel)correct |
| Voltage | 220 (110, 120, 240)correct |
Frequently asked questions
What engine does the Yanmar eG140i have?
3 cylinders, Diesel.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Manufacturer documentation, yanmar.com (retrieved August 2026) · How we check the data
Diesel engine in 3D section
Turn the model, look inside and click an assembly — each one is explained.
