Technical register for agricultural, construction and commercial machinery · sourced data

Xcmg QY65K

Series: Other models

Source: xcmgru.ru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pozostałe modele series from Xcmg includes the QY65K. The engine delivers 235 kW. Rated speed is 2,200 rpm. The unladen weight is 40,600 kg. Top speed is 75.2 km/h. Lifting capacity is 58,967 kg. Rated output across the Xcmg range ranges from 71 to 1,923 kW; the QY65K sits at the bottom of that range with 235 kW. Its immediate neighbours are the LW820G below it with 224 kW and the XCT50E above it with 247.1 kW. Unladen weight across the Xcmg range ranges from 5,350 to 58,000 kg; here the QY65K sits in the upper part of that range with 40,600 kg. 61 Xcmg models across 22 series are on record.

XCMG – other models: the collective page of mobile and rough-terrain cranes outside the named ranges, QY and XCT truck cranes from 16 to 100 tonnes capacity, 170 to 324 kW

This page gathers the XCMG cranes the register could not assign to a named range – truck cranes of the QY range, from the QY16G.5 to the QY100K, and the XCT range, from the XCT25E to the XCT70E. XCMG, the Xuzhou Construction Machinery Group from the eastern Chinese city of Xuzhou in Jiangsu province, traces back to a plant founded in 1943 and is today among China's largest construction-equipment makers. The number in the type designation gives roughly the lifting capacity in tonnes – the QY100K reaches the range's highest capacity, the QY16G.5 its lowest – the letters K and B and the suffixes G.5, K-II and K5-I mark different chassis and boom versions.

Read on 3 more paragraphs

The register lists here 11 versions with 170 to 324 kW, operating weights from 24,000 to 58,000 kg, lifting capacities from 14,515 to 100,000 kg and engine speeds from 1,800 to 2,200 rpm.

XCMG is, alongside Sany and Zoomlion, one of China's three big crane makers and has built a name for itself outside China too with the QY and XCT ranges; the truck cranes compete in the mid and upper tonnage segments with Liebherr, Tadano and Grove.

When buying used, what matters is the condition of the boom telescope and the wire-rope winches, the hydraulic cylinders for outriggers and boom lift, engine and transmission hours, and the condition of tyres and axles; spares and service run through XCMG's Chinese dealer network, which is being expanded in Europe.

Sources: SpecCodex register, model data: XCMG (weitere Modelle), XCMG (manufacturer)

Technical data

Engine

Power235 kWcorrect
Rated speed2,200 rpmcorrect

Dimensions and weights

Unladen weight40,600 kgcorrect

Drivetrain and chassis

Top speed75.2 km/hcorrect

Working data

Lifting capacity58,967 kgcorrect
Gradeability35 %correct

Other data

Sektionen5correct

Where this model stands

Power-to-weight ratio: 5.8 kW/t (235 kW / 40.6 t)

Stronger than 52% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Xcmg QY65K have?

The Xcmg QY65K delivers 235 kW.

How much does the Xcmg QY65K weigh?

The unladen weight is 40,600 kg.

How fast does the Xcmg QY65K go?

Top speed is 75.2 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare