Wiese SA 35CS-S
Built: 2018 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Wiese – other models: the collective page of trailers and semi-trailers outside the named ranges, the SA, SAH and TA type series, unladen weight 820 to 31,540 kg, gross weight 1.5 to 43 tonnes
This page gathers trailers and semi-trailers carried in the register under the name Wiese that could not be assigned to a named range; among the model designations, blank placeholders appear alongside type codes. The SA, SAH and TA codes each denote separate ranges of the programme, and the following number – for instance 35 in SA 35CS-S or 36 in SAH-36 OKM – consistently falls within the weight class in tonnes; the CS, PL, KA and SBG suffixes denote different body variants.
Read on 3 more paragraphs
The register lists here 14 versions with unladen weights from 820 to 31,540 kg, gross weights from 1,500 to 43,000 kg, lengths from 10,400 to 13,970 mm and widths from 1,930 to 2,550 mm.
The span runs from light trailers up to 3.5 tonnes to heavy semi-trailers over 40 tonnes, used in heavy and construction haulage and as low-loaders; the great majority of lengths around 13 to 14 m match the European maximum for semi-trailers. Widths from 1.93 to 2.55 m span both narrower trailers and semi-trailers at the full European width.
On used heavy semi-trailers, the condition of axles, brakes and chassis, the tightness and wear of the body and the kingpin housing count; on the lighter trailers, the tow eye, jockey wheel and side boards; since the set also carries versions without a clear assignment, checking the vehicle documents for the exact type is worthwhile before buying.
Sources: SpecCodex register, model data: Wiese (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,950 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 10,770 mmcorrect |
| Unladen weight | 13,980 kgcorrect |
| Gross vehicle weight | 35,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Wiese SA 35CS-S weigh?
The unladen weight is 13,980 kg.
What is the gross vehicle weight of the Wiese SA 35CS-S?
35,000 kg.
Up to what speed is the Wiese SA 35CS-S approved?
Approved up to 100 km/h.
What are the dimensions of the Wiese SA 35CS-S?
13,950 mm × 2,550 mm.
When was the Wiese SA 35CS-S built?
Production years: 2018.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
N/A
P2
SA 36 CS-S
SA36 CS-S
SA36PT
SAH 3-36 PL-3
SAH-36 OKM
SAH3-36 KA-1
TA 2 18 CS-J
VK2000
WN 35 AT
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.