Weka FG-WGDA
Built: 2015-2015 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Weka – other models: the collective page of trailers and semi-trailers without a uniform range, from the centre-axle trailer to the flat wagon, unladen weight 340 to 12,260 kg, gross weight 1.3 to 38 tonnes
This page gathers trailers carried in the register under the name Weka that could not be assigned to a named range; among the model designations, blank placeholders appear alongside type codes, so no consistent brand profile can be drawn. Recognisable is the 2-ACHS-ZENTRAL design, a two-axle centre-axle trailer in which the axles sit in the middle of the load platform rather than spread front and rear – a design common in commercial vehicles for container and swap-body transport. Further types such as PSL 24 J, PSL120, PSL231 and SL33 denote platform or low-loader bodies of various sizes.
Read on 3 more paragraphs
The register lists here 19 versions with unladen weights from 340 to 12,260 kg, gross weights from 1,300 to 38,000 kg, lengths from 8,500 to 13,800 mm and widths from 2,060 to 2,550 mm.
The span therefore runs from light trailers in the class up to 3.5 tonnes to heavy semi-trailers over 10 tonnes; centre-axle trailers of this size are used above all for swap-body and container haulage and as low-loader trailers for machinery transport.
On used centre-axle trailers, the condition of axles, brakes and the overrun brake system and the torsional stiffness of the chassis count; on platform and low-loader semi-trailers, the load floor, ramps and lashing points; on all types, rust on the chassis and body; since assignment to a single manufacturer is not consistent in this set, checking the vehicle documents for the actual manufacturer is worthwhile before buying.
Technical data
Dimensions and weights
| Length | 9,510 mmcorrect |
|---|---|
| Width | 2,490 mmcorrect |
| Wheelbase | 5,800 mmcorrect |
| Unladen weight | 8,010 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Weka FG-WGDA weigh?
The unladen weight is 8,010 kg.
What is the gross vehicle weight of the Weka FG-WGDA?
18,000 kg.
Up to what speed is the Weka FG-WGDA approved?
Approved up to 100 km/h.
What are the dimensions of the Weka FG-WGDA?
9,510 mm × 2,490 mm.
When was the Weka FG-WGDA built?
Production years: 2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.