Start › Excavators & compaction › Wacker Neuson › ET145

Wacker Neuson ET145

Series: Wacker Neuson Hydraulic Excavator

Source: https://used.wackerneuson.com/produkte/kettenbagger-minibagg

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Wacker Neuson ET145 is a model in the Wacker Neuson Hydraulic Excavator series. The engine delivers 74.9 hp (55.1 kW), has 4 cylinders, with a displacement of 3,398.7 cm³. The engine comes from Perkins. Rated speed is 2,050 rpm. The unladen weight is 16,334.8 kg. Ground clearance is 481.6 mm. The tank holds 205.2 litres. The pump delivers 291.9 l/min. The hydraulic tank holds 110.2 litres. Working pressure is 340 bar. The electrical system runs on 12 V. The engine fitted is the 854F-E34TAWF. Rated output across the Wacker Neuson range ranges from 15.6 to 103.4 hp; the ET145 sits in the upper part of that range with 74.9 hp. Its immediate neighbours are the EW100 below it with 74.8 hp and the ST28 above it with 75 hp. 50 Wacker Neuson models across 9 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine makePerkinscorrect
Engine model854F-E34TAWFcorrect
Power74.9 hp (55.1 kW)correct
Rated speed2,050 rpmcorrect
Cylinders4correct
Displacement3,398.7 cm³correct

Dimensions and weights

Ground clearance481.6correct
Unladen weight16,334.8 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow291.9 l/mincorrect
Hydraulic oil capacity110.2 lcorrect
Hydraulic pressure340 barcorrect
Fuel tank capacity205.2 lcorrect

Other data

Height2,788.9correct

Where this model stands

Power-to-weight ratio: 3.4 kW/t (55 kW / 16.3 t)

Stronger than 17% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Wacker Neuson ET145 have?

The Wacker Neuson ET145 delivers 74.9 hp.

How much does the Wacker Neuson ET145 weigh?

The unladen weight is 16,335 kg.

What engine does the Wacker Neuson ET145 have?

4 cylinders, 3,399 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare