Technical register for agricultural, construction and commercial machinery · sourced data

Veb Kleinschlepper Pomssen DFZ 632

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The DFZ 632 comes from Veb Kleinschlepper Pomssen. The machine is 2,900 mm long, 1,100 mm wide and 2,000 mm high. The unladen weight is 1,600 kg. The wheelbase measures 1,480 mm. Top speed is 28 km/h. Unladen weight within this group ranges from 3 to 18,502,360 kg; the DFZ 632 sits at the bottom of that range with 1,600 kg. Its immediate neighbours are the L4630HST below it with 1,595 kg and the 70 above it with 1,605 kg.

DFZ 632 by Veb Kleinschlepper Pomssen: small tractor with a V2 or V4 diesel engine from East German production as a solid representative of its power class.

Veb Kleinschlepper Pomssen was one of the East German farm machinery plants specialised in small, simple tractors for smaller farms and special crops, where large standard tractors would have been oversized.

Read on 3 more paragraphs

The DFZ 632 is powered by a V2 or V4 diesel engine, depending on the version. At an unladen weight of 1,600 kg, a height of 2,000 mm, a length of 2,900 mm, a width of 1,100 mm and a wheelbase of 1,480 mm, along with a top speed of 28 km/h, the machine is a compact small tractor.

Small tractors of this type with a V-engine were known in East German farm machinery for their compact, manoeuvrable build and served tasks for which large standard tractors would have been too unwieldy, such as row crops, orchard and vineyard work, or small, irregularly shaped plots.

On a used DFZ 632, it is worth checking which of the two engine variants is actually fitted, since spare parts differ between the V2 and V4 versions. The condition of the clutch and gearbox should also be thoroughly checked given the age of small East German tractors like this. Complete documentation of earlier repairs further helps in judging the machine's true condition. Hoses and lines should also be checked for material fatigue after so many years of service. A test drive and a check of every lever and control also belong to a thorough inspection.

Sources: SpecCodex-Register: Kennwerte des Modells DFZ 632

Technical data

Engine

EngineV2- und V4-Dieselmotorencorrect

Dimensions and weights

Length2,900 mmcorrect
Width1,100 mmcorrect
Height2,000 mmcorrect
Wheelbase1,480 mmcorrect
Unladen weight1,600 kgcorrect

Drivetrain and chassis

Top speed28 km/hcorrect

Frequently asked questions

How much does the Veb Kleinschlepper Pomssen DFZ 632 weigh?

The unladen weight is 1,600 kg.

How fast does the Veb Kleinschlepper Pomssen DFZ 632 go?

Top speed is 28 km/h.

What are the dimensions of the Veb Kleinschlepper Pomssen DFZ 632?

2,900 mm × 1,100 mm × 2,000 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare