Valtra N101 HCR
Series: N101
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
N101 Classic (N101 series) by Valtra: six-cylinder SISU diesel engine rated at 82 kW (110 hp), built in Finland within the maker's line-up of the time.
Valtra traditionally builds its N-series tractors in Finland and, as with the N101 Classic, often relies on engines from the equally Finnish maker SISU, a company the tractor builder is closely tied to.
Read on 3 more paragraphs
The N101 Classic is powered by a SISU engine delivering 82 kW (110 hp). The tractor has mechanical front-wheel drive (MFWD) and water cooling, as is common for modern standard tractors in this power class.
Four-wheel-drive tractors of this power class cover the full range of field work through the three-point linkage to ISO 730 and the 540 or 1,000 rpm power take-off, with the four-wheel drive providing extra pulling power on difficult ground compared with rear-drive-only models.
On a used N101 Classic, it is worth checking the four-wheel-drive components for wear and play, as well as the SISU engine for oil consumption and compression. The water-cooling system should also be checked for tightness and scale build-up, since these are the usual weak points on water-cooled engines of this type. Complete documentation of earlier repairs further helps in judging the machine's true condition. Hoses and lines should also be checked for material fatigue after so many years of service. A test drive and a check of every lever and control also belong to a thorough inspection. The overall condition of the paint and sheet metal also gives clues about how the machine was stored over the years.
Sources: SpecCodex-Register: Kennwerte des Modells N101 Classic
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Latvian open data portal (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
