Valmet 901.3 6WD
Series: Valmet Harvester
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 66 CTA Tier 3correct |
|---|---|
| Power | 141.7 kWcorrect |
| Displacement | 6,600.7 cm³correct |
Dimensions and weights
| Width | 2,901.7correct |
|---|---|
| Wheelbase | 3,502.2correct |
| Unladen weight | 14,490 kgcorrect |
Drivetrain and chassis
| Top speed | 25.1 km/hcorrect |
|---|---|
| System voltage | 24 Vcorrect |
Working data
| Fuel tank capacity | 370.2 lcorrect |
|---|
Other data
| Cab height | 3,822.2correct |
|---|
Where this model stands
Power-to-weight ratio: 9.8 kW/t (142 kW / 14.5 t)
Stronger than 48% of the harvesting machinery in the register — out of 287 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valmet 901.3 6WD have?
The Valmet 901.3 6WD delivers 142 kW.
How much does the Valmet 901.3 6WD weigh?
The unladen weight is 14,490 kg.
What engine does the Valmet 901.3 6WD have?
6,601 cm³ displacement.
How fast does the Valmet 901.3 6WD go?
Top speed is 25.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.