Start › Harvesting machinery › Valmet › 415.EX

Valmet 415.EX

Series: Valmet Harvester

Source: https://www.valmet.com/board-and-paper/services-for-board-an

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Valmet 415.EX belongs to the Valmet Harvester series. The engine delivers 160.3 kW. The unladen weight is 43,850 kg. Top speed is 6.4 km/h. The tank holds 100.3 litres. The engine fitted is the 74 ETA. The Valmet Harvester series covers 7 models. Rated output within it ranges from 141.7 to 193.9 kW; the 415.EX sits in the lower part of that range with 160.3 kW. Its immediate neighbours are the 901.3 6WD below it with 141.7 kW and the 425.EX above it with 193.9 kW. 304 Valmet models across 18 series are on record. The model is listed under Harvesting machinery. 6 verified figures from 1 source are on file.

Technical data

Engine

Engine model74 ETAcorrect
Power160.3 kWcorrect

Dimensions and weights

Unladen weight43,850 kgcorrect

Drivetrain and chassis

Top speed6.4 km/hcorrect

Working data

Fuel tank capacity100.3 lcorrect

Other data

Cab height3,252.2correct

Where this model stands

Power-to-weight ratio: 3.7 kW/t (160 kW / 43.9 t)

Stronger than 55% of the harvesting machinery in the register — out of 287 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet 415.EX have?

The Valmet 415.EX delivers 160 kW.

How much does the Valmet 415.EX weigh?

The unladen weight is 43,850 kg.

How fast does the Valmet 415.EX go?

Top speed is 6.4 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

425.EX

425.EXL

445.EXL

901.3 4WD

901.3 6WD

EX10

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare