StartAerial work platformsUpRight › X32BE

UpRight X32BE

Series: UpRight Scissor Lift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the X32BE, UpRight offers a model from the UpRight Scissor Lift series. The engine delivers 22.8 hp (16.8 kW). The unladen weight is 3,920 kg. Ground clearance is 350 mm. Top speed is 4.5 km/h. The fuel is diesel. The engine fitted is the D-905. Tyre size: 27-10,5-15. The UpRight Scissor Lift series covers 4 models. 14 UpRight models across 4 series are on record. The model is listed under Cranes & access platforms. 9 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD-905correct
Fueldieselcorrect
Power22.8 hp (16.8 kW)correct

Dimensions and weights

Width1,770.9correct
Ground clearance350correct
Unladen weight3,920 kgcorrect

Drivetrain and chassis

Tyre size27-10.5-15correct
Top speed4.5 km/hcorrect

Where this model stands

Power-to-weight ratio: 4.3 kW/t (17 kW / 3.9 t)

Stronger than 14% of the aerial work platforms in the register — out of 205 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the UpRight X32BE have?

The UpRight X32BE delivers 22.8 hp.

How much does the UpRight X32BE weigh?

The unladen weight is 3,920 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare