Unic B80A80/2750M
Built: 1988-1988 · Series: Other models
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Unic – further truck models: the collection page of the French maker beyond the named ranges, six- and eight-cylinder engines from 5,499 to 17,173 cm³, up to 22,700 kg gross vehicle weight
This page brings together Unic trucks not assigned to any named range. Unic was a French commercial vehicle maker that, after merging with Simca, passed into the Fiat group and later into Iveco. Type designations such as 190 PAC or P220NC indicate the series and power class, 4X2 and the axle count in other codes the drive type, and H and S different chassis variants.
Read on 3 more paragraphs
The register lists nine versions with six- to eight-cylinder engines displacing 5,499 to 17,173 cm³. Kerb weights range from 5,350 to 15,825 kg, gross vehicle weights from 7,499 to 22,700 kg, lengths from 5,200 to 7,900 mm and widths from 2,300 to 2,530 mm.
As part of the Fiat and later Iveco group, Unic operated in the French market alongside Berliet, Saviem and Renault, covering the medium- to heavy-duty segment for construction, long-haul and specialist transport with its ranges. The models gathered here mostly date from the middle decades of the company's history, before its full absorption into Iveco.
The frame and axle suspension deserve particular attention, since these chassis often worked in construction and heavy haulage. The engine, clutch and pneumatic brake system should be checked for wear and leaks, along with corrosion of the cab floor. Parts for the engine and drivetrain are partly still available through the Iveco network, while specific Unic body parts are usually only found through salvage or as reproductions.
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 5,861 cm³correct |
Dimensions and weights
| Length | 5,200 mmcorrect |
|---|---|
| Width | 2,400 mmcorrect |
| Wheelbase | 2,750 mmcorrect |
| Unladen weight | 5,660 kgcorrect |
| Gross vehicle weight | 7,499 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Unic B80A80/2750M weigh?
The unladen weight is 5,660 kg.
What is the gross vehicle weight of the Unic B80A80/2750M?
7,499 kg.
What engine does the Unic B80A80/2750M have?
6 cylinders, 5,861 cm³ displacement.
What are the dimensions of the Unic B80A80/2750M?
5,200 mm × 2,400 mm.
When was the Unic B80A80/2750M built?
Production years: 1988.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.