Trequip WH2400X
Built: 2022-2023 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Trequip – other models: the collective page of heavy-load trailers outside the named ranges, types such as WH3000XP and Pullens Sled V1, 11.2 to 52.8 t unladen weight at 11.9 to 56 t gross weight
This page gathers the Trequip trailers the register could not assign to a named range. Among the model names is the Pullens Sled V1, a sled-type trailer, a design for transporting heavy, unwieldy loads over short distances; the other types, 6400XT, D 3400XT, WH2400X, WH3000XP and WH300X, combine letter codes with a multi-digit number for the respective capacity class. The letters XT and XP in the designations indicate successive development variants of a given model within the range.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 11,200 to 52,800 kg, gross weights from 11,900 to 56,000 kg, lengths from 9,400 to 13,190 mm and widths from 2,270 to 2,600 mm.
Unladen weights of up to over 52 tonnes against gross weights of up to 56 tonnes show that these are extremely heavily built special trailers for transporting exceptional loads, whose own weight accounts for most of the permissible gross mass. Such trailers are often used in works traffic, at heavy-industry sites or for transporting construction machinery over short distances.
On a used purchase, what matters on these heavy-load trailers is the condition of frame, cross members and welds, axles, brakes and suspension, drawbar and coupling, and wear on bearing surfaces and lashing points; spare parts are matched to model and axle configuration.
Sources: SpecCodex register, model data: Trequip (weitere Modelle)
Technical data
Dimensions and weights
| Length | 9,400 mmcorrect |
|---|---|
| Width | 2,270 mmcorrect |
| Wheelbase | 6,330 mmcorrect |
| Unladen weight | 11,200 kgcorrect |
| Gross vehicle weight | 11,900 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Trequip WH2400X weigh?
The unladen weight is 11,200 kg.
What is the gross vehicle weight of the Trequip WH2400X?
11,900 kg.
Up to what speed is the Trequip WH2400X approved?
Approved up to 100 km/h.
What are the dimensions of the Trequip WH2400X?
9,400 mm × 2,270 mm.
When was the Trequip WH2400X built?
Production years: 2022-2023.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
