StartForklift trucksToyota › 7FGU25

Toyota 7FGU25

Series: Toyota Forklift

The photo shows the 8FDU15 from the same series. Source: https://www.landwirt.com/kleinanzeigen/detail/gabelstapler-t

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a forklift truck, the Toyota 7FGU25 belongs to the Toyota Forklift series. Engine output is 39.5 kW. Rated power is reached at 2,400 rpm.

Top speed is 18 km/h. It carries 2,268 kg.

Within the range, rated power spans from 32.8 to 70.8 kW; with 39.5 kW, the 7FGU25 sits in the lower third. Directly alongside are the 8FGCSU20 with 35.8 kW below and the 7FDU15 with 40.3 kW above.

Technical data

Engine

Power39.5 kWcorrect
Rated speed2,400 rpmcorrect

Drivetrain and chassis

Tyre typepneumatic tyrescorrect
Top speed17.5 km/hcorrect

Working data

Lifting capacity2,268 kgcorrect

Other data

Front wheels2correct
Lift speed36 m/mincorrect
Load centre609.6 mmcorrect
Rear wheels2correct

Frequently asked questions

How much power does the Toyota 7FGU25 have?

The Toyota 7FGU25 delivers 39.5 kW.

How fast does the Toyota 7FGU25 go?

Top speed is 17.5 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Forklift in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare