StartForklift trucksToyota › 8FGCSU20

Toyota 8FGCSU20

Series: Toyota Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a forklift truck, the Toyota 8FGCSU20 belongs to the Toyota Forklift series. Engine output is 35.8 kW.

At 18 km/h, that is as fast as it goes. It carries 1,814 kg.

Within the range, rated power spans from 32.8 to 70.8 kW; with 35.8 kW, the 8FGCSU20 sits at the bottom end. Directly alongside are the 7FGCU18 with 32.8 kW below and the 7FGCU20 with 39.5 kW above.

Technical data

Engine

Power35.8 kWcorrect

Dimensions and weights

Width940 mmcorrect

Drivetrain and chassis

Tyre typecushion tyrescorrect
Top speed17.5 km/hcorrect
Turning radius1,810 mmcorrect

Working data

Lifting capacity1,814.4 kgcorrect

Other data

Front wheels2correct
Lift speed26.7 m/mincorrect
Rear wheels2correct

Frequently asked questions

How much power does the Toyota 8FGCSU20 have?

The Toyota 8FGCSU20 delivers 35.8 kW.

How fast does the Toyota 8FGCSU20 go?

Top speed is 17.5 km/h.

What is the load capacity of the Toyota 8FGCSU20?

Load capacity is 1,814 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Forklift in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare